Icom IC-PW1 1000 watt Linear Amplifier

$2,375.00

Free Shipping!

Out of stock

SKU: SD033HE Category:

Description

Pre Owned in great condition. Tested and working. Minor scratch on the top right back and top front left on the exterior (please see pictures)
This is a late serial number amp that includes the power off bypass feature.
No original packing for this item – HamEstate will professionally pack this item and ship FedEx insured.

Comes with the following:
Controller separation cable
ACC cables
Instruction Manual
Feet has been replaced with wheel casters 

Does NOT include 240 Outlet on power cable

Please note the Array Solutions Power Master 2 meter is not included!

The Icom IC-PW1 is a 1000 watt linear amplifier with built-in power supply. This state-of-the-art, heavy duty amp covers 160-15 meters plus 6 meters. It features auto band changing, four antenna connectors and three cooling fans. The control head is removable and remote-able. Two exciter inputs are available. This device is built to high construction standards inside and out. The power amp unit is designed for fully duty.

The power requirement for this amp is 180-264 or 90-132 VAC (single phase 50/60 Hz). Automatic AC input voltage is employed. Current drain is 15 Amps at 200 volts or 20 Amps 100 volts. Input and output connectors are SO-239. Driving power may be up to 100 watts (60 watts minimum). Size of the main unit is:  13.8 x 11 x 16 inches. Total weight is 55.5 lbs. (25 kg). The controller unit may be separate (as shown), or mounted on the top front panel.

Specifications:

General

  • Frequency Coverage (MHz):
    • 1.800 – 1.999
    • 3.500 – 3.999
    • 7.000 – 7.300
    • 10.100 – 10.150
    • 14.000 – 14.350 (revised 5/27/99)
    • 1.8068 – 18.168
    • 21.000 – 21.450 (revised 5/27/99)
    • 24.890 – 24.990* (revised 5/27/99)
    • 28.000 – 28.700* (revised 5/27/99)
    • 50.000 – 54.000 (revised 5/27/99)
    • *Inhibited in the US version.
  • Current Drain:
    • Less than 15 A (max. output at 200 V)
    • Less than 20 A (max. output at 100 V)
  • Usable temperature range: -10蚓 to +40蚓; +14蚌 to +104蚌.
  • Power supply requirements: 180 – 264 V AC or 90 – 132 V AC (single phase; 50 / 60 Hz)
  • Duty cycle: Full duty
  • Input connector: SO-239 x 2 (50 ohm)
  • Output connector: SO-239 x 4 (50 ohm)

Linear Ampflier

  • Output power:
    • CW, RTTY: 1 kW at 180 – 264 V AC; 500 W at 90 – 132 V AC input
    • SSB 1 kW PEP at 180 – 264 V AC; 500 W PEP at 90 – 132 V AC input
  • Driving power: Max. 100 W
  • Spurious emissions:
    • Less than -60 dB (HF bands)
    • Less than -50 dB (50 MHz)

Antenna Tuner

  • Output matching range (tuner switch ON):
    • 16.7 ohms to 150 ohms impedance (HF bands)
    • 20.0 ohms to 125 ohms impedance (50 MHz)
  • Auto tuning accuracy: VSWR 1.5:1 or less
  • Min. required input power: 60 W
  • Insertion loss: Less than 1 dB (after tuning)

Supplied Accesories

  • Controller separation cable
  • ACC cables

You may also like…